How to set up ‘hourly’ logging with pywws¶
Introduction¶
There are two quite different modes of operation with pywws.
Traditionally pywws.Hourly
would be run at regular intervals (usually an hour) from cron.
This is suitable for fairly static websites, but more frequent updates can be useful for sites such as Weather Underground (http://www.wunderground.com/).
The newer pywws.LiveLog
program runs continuously and can upload data every 48 seconds.
Note that although this document (and the program name) refers to ‘hourly’ logging, you can run pywws.Hourly
as often or as infrequently as you like, but don’t try to run it more often than double your logging interval.
For example, if your logging interval is 10 minutes, don’t run pywws.Hourly
more often than every 20 minutes.
Getting started¶
First of all, you need to install pywws and make sure it can get data from your weather station. See How to get started with pywws for details.
Try running pywws.Hourly
from the command line, with a high level of verbosity so you can see what’s happening.
Use the pywws-hourly
command to run pywws.Hourly
:
pywws-hourly -vvv ~/weather/data
Within five minutes (assuming you have set a 5 minute logging interval) you should see a ‘live_data new ptr’ message, followed by fetching any new data from the weather station and processing it.
Veranderd in versie 14.04.dev1194: the pywws-hourly
command replaced scripts/pywws-hourly.py
.
Configuring file locations¶
Open your weather.ini file with a text editor.
You should have a [paths]
section similar to the following (where xxx
is your user name):
[paths]
work = /tmp/weather
templates = /home/xxx/weather/templates/
graph_templates = /home/xxx/weather/graph_templates/
local_files = /home/xxx/weather/results/
Edit these to suit your installation and preferences.
work
is an existing temporary directory used to store intermediate files, templates
is the directory where you keep your text template files, graph_templates
is the directory where you keep your graph template files and local_files
is a directory where template output that is not uploaded to your web site is put.
Don’t use the pywws example directories for your templates, as they will get over-written when you upgrade pywws.
Copy your text and graph templates to the appropriate directories.
You may find some of the examples provided with pywws useful to get started.
The pywws-version -v
command should show you where the examples are on your computer.
Nieuw in versie 14.04.dev1194: the pywws-version
command.
Configuring periodic tasks¶
In weather.ini you should have [logged]
, [hourly]
, [12 hourly]
and [daily]
sections similar to the following:
[logged]
services = []
plot = []
text = []
[hourly]
...
These specify what pywws.Hourly
should do when it is run.
Tasks in the [logged]
section are done every time there is new logged data, tasks in the [hourly]
section are done every hour, tasks in the [12 hourly]
section are done twice daily and tasks in the [daily]
section are done once per day.
The services
entry is a list of online weather services to upload data to.
The plot
and text
entries are lists of template files for plots and text files to be processed and, optionally, uploaded to your web site.
Add the names of your template files and weather services to the appropriate entries, for example:
[logged]
services = ['underground', 'metoffice']
plot = []
text = []
[hourly]
services = []
plot = ['7days.png.xml', '24hrs.png.xml', 'rose_24hrs.png.xml']
text = [('tweet.txt', 'T'), '24hrs.txt', '6hrs.txt', '7days.txt']
[12 hourly]
services = []
plot = []
text = []
[daily]
services = []
plot = ['28days.png.xml']
text = [('forecast.txt', 'T'), 'allmonths.txt']
Note the use of the 'T'
flag – this tells pywws to send the template result to Twitter instead of uploading it to your ftp site.
You can test that all these are working by removing the [last update]
section from status.ini, then running pywws.Hourly
again:
pywws-hourly -v ~/weather/data
Nieuw in versie 14.05.dev1211: [cron name]
sections.
If you need more flexibility in when tasks are done you can use [cron name]
sections.
See weather.ini - configuration file format for more detail.
Veranderd in versie 13.06_r1015: added the 'T'
flag.
Previously Twitter templates were listed separately in twitter
entries in the [hourly]
and other sections.
The older syntax still works, but is deprecated.
Veranderd in versie 13.05_r1009: the last update information was previously stored in weather.ini, with last update
entries in several sections.
Run as a cron job¶
Most UNIX/Linux systems have a ‘cron’ daemon that can run programs at certain times, even if you are not logged in to the computer.
You edit a ‘crontab’ file to specify what to run and when to run it.
For example, to run pywws.Hourly
every hour, at zero minutes past the hour:
0 * * * * pywws-hourly /home/xxx/weather/data
This might work, but if it didn’t you probably won’t get any error messages to tell you what went wrong.
It’s much better to run a script that runs pywws.Hourly
and then emails you any output it produces.
Here’s the script I use:
#!/bin/sh
#
# weather station logger calling script
export PATH=$PATH:/usr/local/bin
if [ ! -d ~/weather/data/ ]; then
exit
fi
log=/var/log/log-weather
pywws-hourly -v ~/weather/data >$log 2>&1
# mail the log file
/home/jim/scripts/email-log.sh $log "weather log"
You’ll need to edit this quite a lot to suit your file locations and so on, but it gives some idea of what to do.
Comments or questions? Please subscribe to the pywws mailing list http://groups.google.com/group/pywws and let us know.